Administrator Guide

Layer 2 Switching Commands 547
no ipv6 mld snooping querier
Default Configuration
MLD Snooping Querier is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
It is not recommended the MLD Snooping Querier be enabled on a switch
enabled for IPv6 multicast routing.
Example
console(config)#ipv6 mld snooping querier
ipv6 mld snooping querier (VLAN mode)
Use the ipv6 mld snooping querier command in VLAN mode to enable MLD
Snooping Querier on a VLAN. Use the no form of this command to disable
MLD Snooping Querier on a VLAN.
Syntax
ipv6 mld snooping querier vlan vlan-id
no ipv6 mld snooping querier vlan vlan-id
• vlan-id — A VLAN identifier. (Range: 1–4093)
Default Configuration
MLD Snooping Querier is disabled by default on all VLANs.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
2CSNXXX_SWUM204.book Page 547 Monday, January 25, 2016 1:25 PM