Administrator Guide

Layer 2 Switching Commands 557
Syntax
show ip verify source [interface interface-id ]
• interface-id : A valid physical interface identifier or port-channel identifier
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip verify source interface gigabitethernet 1/0/1
show ip source binding
Use the show ip source binding command in Privileged Exec mode to display
all bindings (static and dynamic).
Syntax
show ip source binding
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM204.book Page 557 Monday, January 25, 2016 1:25 PM