Administrator Guide

Layer 2 Switching Commands 585
Syntax
lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
no lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
• sys-name — Transmits the system name TLV. This is the configured host
name for the system.
•
sys-desc — Transmits the system description TLV
•
sys-cap — Transmits the system capabilities TLV
•
port-desc — Transmits the port description TLV
Default Configuration
By default, the port-desc and sys-name TLVs are transmitted.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The string configured by the hostname command is transmitted by in the sys-
name TLV.
Use the show lldp remote-device all command to see the advertised LLDP
neighbor information.
Example
The following example shows how to include the system description TLV in
local data transmit.
console(config-if-1/0/3)#lldp transmit-tlv sys-desc
show lldp
Use the show lldp command in Privileged Exec mode to display the current
LLDP configuration summary.
Syntax
show lldp
2CSNXXX_SWUM204.book Page 585 Monday, January 25, 2016 1:25 PM