Administrator Guide

Layer 2 Switching Commands 593
DSCP: 2
Unknown: False
Tagged: True
Inventory
Hardware Rev: xxx xxx xxx
Firmware Rev: xxx xxx xxx
Software Rev: xxx xxx xxx
Serial Num: xxx xxx xxx
Mfg Name: xxx xxx xxx
Model Name: xxx xxx xxx
Asset ID: xxx xxx xxx
Location
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
show lldp remote-device
Use the lldp remote-device command in Privileged Exec mode to display the
current LLDP remote data. This command can display summary information
or detail for each interface.
Syntax
show lldp remote-device {detail interface | interface | all}
• detail — Includes detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Substitute
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port or
fortygigabitethernet unit/slot/port }
2CSNXXX_SWUM204.book Page 593 Monday, January 25, 2016 1:25 PM