Administrator Guide

Layer 2 Switching Commands 602
Command History
Implemented in version 6.3.0.1 firmware.
Example
console#show keepalive
Keepalive Service: Enabled
Transmit Interval : 5 seconds
Retry Count : 1
show keepalive statistics
Use the show keepalive statistics command to display the loop protect status
for one or all interfaces.
Syntax
show keepalive statistics { interface-id | all}
• interface-id — Displays the statistics for the specified Ethernet (Physical)
interface.
•
all — Displays statistics for all interfaces.
Default Configuration
There is no default configuration.
Command Mode
Privileged Exec mode and all configuration sub modes
Retry Count The number of times a keepalive packet
must be seen before a looped state is
declared.
Field Description
2CSNXXX_SWUM204.book Page 602 Monday, January 25, 2016 1:25 PM