Administrator Guide

Layer 2 Switching Commands 613
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode and above
User Guidelines
There are no user guidelines for this command.
Example
(console)# show vpc 10
VPC Id 10
-----------------
Configuration mode......................Enabled
Operational mode........................Enabled
Port channel................................Po1
Self member ports Status
------------------------ ---------
Gi1/0/2 Up
Gi1/0/6 Down
show vpc brief
Use the show vpc brief command to display the MLAG global status. The
command displays the current MLAG operational mode as well as the
peerlink and keepalive status is also displayed. The number of configured and
operational MLAGs along with the system MAC and role are also displayed.
Syntax
show vpc brief
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode and above
2CSNXXX_SWUM204.book Page 613 Monday, January 25, 2016 1:25 PM