Administrator Guide

Layer 2 Switching Commands 615
Number of VPCs configured...................... 2
Number of VPCs operational..................... 2
VPC id# 1
-----------
Interface...................................... Po2
Configured Vlans............................... 1,10,11,12,13,14,15,16,17
VPC Interface State............................ Active
Local MemberPorts Status
----------------- ------
Gi1/0/23 UP
Gi1/0/24 UP
Peer MemberPorts Status
---------------- ------
Gi1/0/23 UP
Gi1/0/24 UP
VPC id# 2
-----------
Interface...................................... Po3
Configured Vlans............................... 1,10,11,12,13,14,15,16,17
VPC Interface State............................ Active
show vpc consistency-parameters
Use the show vpc consistency parameters on both MLAG peers to display
MLAG related configuration information in a format suitable for comparison
with the other MLAG peer.
Syntax
show vpc consistency-parameters { global | interface port-channel-number }
• port-channel-number —A valid port-channel identifier (range 1-128).
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode and above
2CSNXXX_SWUM204.book Page 615 Monday, January 25, 2016 1:25 PM