Administrator Guide

Layer 2 Switching Commands 616
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in 6.2.0.1 firmware.
Updated in 6.3.0.1 firmware.
Example
console# show vpc consistency-parameters global
Parameter Value
--------------------- -------------------------------------------
STP Mode Enabled
STP Version IEEE 802.1s
BPDU Filter Mode Enabled
BPDU Guard Mode Enabled
MST Instances 1,2,4
FDB Aging Time 300 seconds
<AA:BB:CC:DD:EE:FF>
32767
VPC System MAC Address 00:1E:C9:DE.A2:08
VPC System Priority 32767
VPC Domain ID 1
MST VLAN Configuration
Instance Associated VLAN
------------- -----------------------------------
1 7,8,10,20
2 4,5,40-50
4 30,32,34-38
RSTP-PV Configuration
Direct Rapid Convergence: Enabled/Disabled
DRC Update Rate: <0-32000> per second
Indirect Rapid Convergence: Enabled/Disabled
VLAN STP STP Hello Forward Maximum Priority
Mode Root Time Time Age
----- -------- ------- ----- ------- -------- ---------
4 Enabled Primary 2 15 15 0
switch# show vpc consistency-parameters interface port-channel 2
2CSNXXX_SWUM204.book Page 616 Monday, January 25, 2016 1:25 PM