Administrator Guide

Layer 2 Switching Commands 639
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
The following table lists the completion messages.
The following table explains the output parameters.
Examples
console#show mvr interface
Port Type Status Immediate Leave
--------- --------------- --------------------- --------------------
Gi1/0/9 RECEIVER ACTIVE/inVLAN DISABLED
console#show mvr interface gi1/0/9
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
console#show mvr interface gi1/0/23 members
235.0.0.1 STATIC ACTIVE
Message Type Message Description
Successful Completion Message None
Error Completion Message MVR disabled
Parameter Description
Port Interface number
Type The MVR port type. It can be None,
Receiver, or Source type.
Status The interface status. It consists of two
characteristics:
1 active or inactive indicating if port is
forwarding.
2 inVLAN or notInVLAN indicating if the
port is part of any VLAN
Immediate Leave The state of immediate mode. It can be
enabled or disabled.
2CSNXXX_SWUM204.book Page 639 Monday, January 25, 2016 1:25 PM