Administrator Guide

Layer 2 Switching Commands 654
port-channel min-links
Use the port-channel min-links command in Interface Configuration (port-
channel) mode to set the minimum number of links that must be up in order
for the port channel interface to be declared up. Use the no form of the
command to return the configuration to the default value (1).
Syntax
port-channel min-links 1-8
no port-channel min-links
• min-links —The minimum number of links that must be active before the
link is declared up. Range 1-8. The default is 1.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax
show interfaces port-channel [ port-channel-number ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
2CSNXXX_SWUM204.book Page 654 Monday, January 25, 2016 1:25 PM