Administrator Guide

Layer 2 Switching Commands 655
User Guidelines
The command displays the following information.
Example #1
console#show interfaces port-channel
ChannelPorts ChTypeHash Algorithm Typemin-Links
------------------------- -----------------------------------
Po1Inactive: Gi1/0/3Dynamic31
Po2No Configured PortsStatic31
Hash Algorithm Type
1 - Source MAC, VLAN, Ethertype, source module and port ID
2 - Destination MAC, VLAN, Ethertype, source module and port ID
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, Ethertype, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hashing mode
Example #2
console#show interfaces port-channel 1
Channel Ports Ch-Type Hash Type Min-links Local Prf
------- ----------------------------- -------- ---------- --------- --------
-
Po1 Inactive: Gi1/0/1, Gi1/0/2, Dynamic 3 1 Enabled
Gi1/0/3, Gi1/0/4
show lacp
Use this command in Privileged Exec mode to display LACP information for
Ethernet ports.
Parameter Description
[
index ] Number of the port channel to show. This parameter is
optional. If the port channel number is not given, all the
channel groups are displayed. (Range: Valid port-channel
number, 1 to 48).
Local Prf An additional field added to support the display of the local
preference.
2CSNXXX_SWUM204.book Page 655 Monday, January 25, 2016 1:25 PM