Administrator Guide

Layer 2 Switching Commands 656
Syntax
show lacp {gigabitethernet unit/slot/port| tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port [{parameters | statistics}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display LACP Ethernet interface
information.
console#show lacp gi1/0/1
port Gi1/0/1 LACP parameters:
Actor:
system priority: 1
port Admin key: 0
port oper key: 1
port oper priority: 1
port oper timeout: LONG
port Admin timeout: LONG
LACP Activity: ACTIVE
Aggregation: AGGREGATABLE
synchronization: FALSE
collecting: FALSE
distributing: FALSE
expired: FALSE
Partner:
port Admin key: 0
port oper key: 0
port Admin priority: 0
port oper priority: 0
port Oper timeout: LONG
LACP Activity: PASSIVE
Aggregation: NOTAGGREGATABLE
2CSNXXX_SWUM204.book Page 656 Monday, January 25, 2016 1:25 PM