Administrator Guide

Layer 2 Switching Commands 674
0020 00 00 00 00 88 ff fe 2f 8e 82 ff 02 00 00 00 00
0030 00 00 00 00 00 00 00 00 00 01 3a 00 05 02 00 00
0040 01 00 82 00 43 62 27 10 00 00 00 00 00 00 00 00
0050 00 00 00 00 00 00 00 00 00 00 ff ff 00 00
show monitor session
Use the show monitor session command in Privileged Exec mode to display
status of port monitoring, VLAN-based mirroring, Flow-based mirroring, and
mirroring across RSPAN.
Syntax
show monitor session session_number [detail]
• session _number — Session identification number.
• detail—Displays additional information.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Examples
The following example shows port monitor status.
console(config)#show monitor session 1
Session : 1
Admin mode : Disabled
Type : Local session
Source ports :
Both : Te1/0/10
Destination ports : Te2/0/20
IP access-group : a1
2CSNXXX_SWUM204.book Page 674 Monday, January 25, 2016 1:25 PM