Administrator Guide

Layer 2 Switching Commands 676
TX Only : None
Both : None
Source VLANs :
RX Only : None
Source RSPAN VLAN : 999
Destination Ports : Gi1/0/15
Dest RSPAN VLAN : None
show vlan remote-span
Use this command to display the RSPAN VLAN IDs.
Syntax
show vlan remote-span
Default Configuration
This command has no default configuration.
Command Modes
User Exec, Privileged Exec modes.
User Guidelines
This command has no user guidelines.
Example
The following example shows the RSPAN VLANs configured on the switch.
console# show vlan remote-span
RSPAN Vlan
-----------------------------------------------------
10
2CSNXXX_SWUM204.book Page 676 Monday, January 25, 2016 1:25 PM