Administrator Guide

Layer 2 Switching Commands 681
assign-queue
Use the assign-queue command in Policy-Class-Map Configuration mode to
modify the queue ID to which the associated traffic stream is assigned.
Syntax
assign-queue queueid
• queueid — Specifies a valid queue ID. (Range: integer from 0–6.)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
classofservice trust match dstip6 police-simple show diffserv service
brief
conform-color match dstl4port police-single-rate show interfaces cos-
queue
cos-queue min-
bandwidth
match ethertype police-two-rate show interfaces
random-detect
cos-queue random-
detect
match ip6flowlbl policy-map show policy-map
cos-queue strict match ip dscp random-detect
queue-parms
show policy-map
interface
diffserv match ip
precedence
random-detect
exponential-
weighting-constant
show service-policy
drop match ip tos redirect traffic-shape
mark cos match protocol service-policy vlan priority
2CSNXXX_SWUM204.book Page 681 Monday, January 25, 2016 1:25 PM