Administrator Guide

Layer 2 Switching Commands 735
show diffserv
Use the show diffserv command to display the DiffServ general information,
which includes the current administrative mode setting as well as the current
and maximum number of DiffServ components.
NOTE: On the N1500 Series switches, enable Simple RED since the
hardware is not capable of Weighted Red.
Syntax
show diffserv
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show diffserv
DiffServ Admin mode.......................... Enable
Class Table Size Current/Max................. 5 / 25
Class Rule Table Size Current/Max............ 6 / 150
Policy Table Size Current/Max................ 2 / 64
Policy Instance Table Size Current/Max....... 2 / 640
Policy Attribute Table Size Current/Max...... 2 / 1920
Service Table Size Current/Max............... 26 / 214
show diffserv service interface
Use this command to display policy service information for the specified
interface.
NOTE: This command is not available on the N1500 Series switches.
2CSNXXX_SWUM204.book Page 735 Monday, January 25, 2016 1:25 PM