Administrator Guide

Layer 2 Switching Commands 736
Syntax
show diffserv service interface { interface-id } {in|out}
• interface-id —An Ethernet or port-channel identifier.
•
in —Show ingress policies.
•
out —Show egress policies.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... Gi1/0/1
Direction..................................... In
No policy is attached to this interface in this direction.
show diffserv service brief
Use the show diffserv service brief command in Privileged Exec mode to
display all interfaces in the system to which a DiffServ policy has been
attached.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show diffserv service brief
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 736 Monday, January 25, 2016 1:25 PM