Administrator Guide

Layer 2 Switching Commands 737
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces in the system to
which a DiffServ policy has been attached.
console# show diffserv service brief
Interface Direction OperStatus Policy Name
----------- ----------- ------------ -------------------
Gi1/0/1 in Down DELL
show interfaces cos-queue
Use the show interfaces cos-queue command in Privileged Exec mode to
display the class-of-service queue configuration for the specified interface.
Syntax
show interfaces cos-queue [{gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
If the interface is specified, the class-of-service queue configuration of the
interface is displayed. If omitted, the most recent global configuration
settings are displayed.
2CSNXXX_SWUM204.book Page 737 Monday, January 25, 2016 1:25 PM