Administrator Guide

Layer 2 Switching Commands 741
Example 2
This example show ECN enabled for green color packets on CoS queue 0 and
on an N1500 Series switch:
console#show interfaces random-detect
Global Configuration
SRED SRED Drop
Queue ID Minimum Threshold Probability Scale ECN Enabled
-------- ----------------- ----------------- -------------
0 40/ 30/ 20 8/ 8/ 8 1/ 0/ 0
1 40/ 30/ 20 8/ 8/ 8 1/ 0/ 0
2 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
3 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
4 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
5 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
6 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
show policy-map
Use the show policy-map command in Privileged Exec mode to display all
configuration information for the specified policy.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show policy-map [ policyname ]
• policyname — Specifies the name of a valid existing DiffServ policy.
(Range: 1-31)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM204.book Page 741 Monday, January 25, 2016 1:25 PM