Administrator Guide

Layer 2 Switching Commands 742
Example
The following example displays the DiffServ information.
console#show policy-map
Policy Name Policy Type Class Members
----------- ----------- -------------
POLY1 xxx DellClass
DELL xxx DellClass
show policy-map interface
Use the show policy-map interface command in Privileged Exec mode to
display policy-oriented statistics information for the specified interface.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show policy-map interface { interface-id } {in|out}
• interface-id —An Ethernet or port-channel identifier.
•
in —Show inbound service policies. The offered value indicates the
number of packets received by the classifier.
•
out —Show outbound service policies. The discarded value indicates the
number of packets discarded by the policy.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port te1/0/1.
console#show policy-map interface te1/0/1 in
Interface..................................... Te1/0/1
Operational Status............................ Down
2CSNXXX_SWUM204.book Page 742 Monday, January 25, 2016 1:25 PM