Administrator Guide

Layer 2 Switching Commands 809
Example
The following example groups VLAN 221 through 228 and VLAN 889 to
execute the commands entered in interface range mode.
dellswitch(config)#vlan 2-5
dellswitch(config-vlan2-5)#exit
dellswitch(config)#interface vlan 2
dellswitch(config-if-vlan2)#interface vlan 3
dellswitch(config-if-vlan3)#interface vlan 4
dellswitch(config-if-vlan4)#interface vlan 5
dellswitch(config-if-vlan5)#interface range vlan 2-5
dellswitch(config-if)#
name (VLAN Configuration)
Use the name command in VLAN Configuration mode to configure the
VLAN name. To return to the default configuration, use the no form of this
command.
NOTE: This command cannot be configured for a range of interfaces (range
context).
Syntax
name vlan–name
no name
• vlan–name —The name of the VLAN. Must be 1–32 characters in length.
Default Configuration
The default VLAN name is default.
Command Mode
VLAN Configuration mode
User Guidelines
The VLAN name may include any alphanumeric characters including a space,
underscore, or dash. Enclose the string in double quotes to include spaces
within the name. The surrounding quotes are not used as part of the name.
2CSNXXX_SWUM204.book Page 809 Monday, January 25, 2016 1:25 PM