Administrator Guide

Layer 2 Switching Commands 810
The CLI does not filter illegal characters and may truncate entries at the first
illegal character or reject the entry entirely. The name of VLAN 1 cannot be
changed.
Example
The following example configures a VLAN name of office2 for VLAN 2.
console(config)#vlan 2
console(config-vlan2)#name "RDU-NOC Management VLAN"
private-vlan
Use the private-vlan command in VLAN Configuration mode to define a
private VLAN association between the primary and secondary VLANs.
Use the no form of the command to remove the private VLAN association.
Syntax
private-vlan {primary|isolated|community|association [add|remove] vlan-
list
}
no private-vlan [association]
• association —Defines an association between the primary VLAN and
secondary VLANs.
•
primary —Specify that the selected VLAN is the primary VLAN.
•
community —Specify that the selected VLAN is the community VLAN.
•
isolated —Specify that the selected VLAN is the isolated VLAN.
•
add —Associates a secondary VLAN with the primary VLAN.
•
remove —Deletes the secondary VLAN association with the primary
VLAN.
•
vlan-list —A list of secondary VLAN ids to be mapped to a primary VLAN.
The VLAN list can contain multiple entries separated by commas and
containing no spaces. Each entry can be a single VLAN id or a hyphenated
range of VLANs.
Default Configuration
This command has no default setting.
2CSNXXX_SWUM204.book Page 810 Monday, January 25, 2016 1:25 PM