Administrator Guide

Layer 2 Switching Commands 819
console(config)#show switchport ethertype interface gi1/0/1
Interface EtherType Secondary TPIDs
--------- --------- ---------------
Gi1/0/1 802.1
console(config-vlan10)#show switchport ethertype interface all
console(config)#show switchport ethertype interface gi1/0/1
Interface EtherType Secondary TPIDs
--------- --------- ---------------
Gi1/0/1 802.1
Gi1/0/2 802.1 VMAN
Gi1/0/3 802.1
Gi1/0/4 802.1
Gi1/0/5 802.1
show vlan
Use the show vlan command in Privileged Exec mode to display detailed
information, including interface information and dynamic VLAN type, for a
specific VLAN or RSPAN VLAN. The ID is a valid VLAN identification
number.
Syntax
show vlan [id vlan-id | name vlan-name ]
• vlan-id —A VLAN identifier
•
vlan-name —A valid VLAN name (Range 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
• VLAN—The VLAN identifer
2CSNXXX_SWUM204.book Page 819 Monday, January 25, 2016 1:25 PM