Administrator Guide

Layer 2 Switching Commands 821
show vlan association mac
Use the show vlan association mac command in Privileged Exec mode to
display the VLAN associated with a specific configured MAC address. If no
MAC address is specified, the VLAN associations of all the configured MAC
addresses are displayed.
Syntax
show vlan association mac [ mac-address ]
• mac-address — Specifies the MAC address to be entered in the list.
(Range: Any valid MAC address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
• MAC Address—The configured MAC address
• VLAN —The associated VLAN identifier
Example
The following example shows no entry in MAC address to VLAN cross-
reference.
console#show vlan association mac
MAC Address VLAN ID
----------------------- -------
0001.0001.0001.0001 1
show vlan association subnet
Use the show vlan association subnet command in Privileged Exec mode to
display the VLAN associated with a specific configured IP-Address and
netmask. If no IP Address and net mask are specified, the VLAN associations
of all the configured IP-subnets are displayed.
2CSNXXX_SWUM204.book Page 821 Monday, January 25, 2016 1:25 PM