Administrator Guide

Layer 2 Switching Commands 822
Syntax
show vlan association subnet [ ip-address ip-mask ]
• ip-address — Specifies IP address to be shown
•
ip-mask — Specifies IP mask to be shown
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
• IP Address—The configured IP address
• IP Mask—The confgured IP subnet mask
• VLAN ID—The associated VLAN identifier
Example
The following example shows the case if no IP Subnet to VLAN association
exists.
console#show vlan association subnet
IP Address IP Mask VLAN ID
---------------- ---------------- -------
The IP Subnet to VLAN association does not exist.
show vlan private-vlan
Use the show vlan private-vlan command in Privileged Exec mode to display
information about the configured private VLANs including primary and
secondary VLAN IDs, type (community, isolated, or primary), and the ports
which belong to a private VLAN.
Syntax
show vlan private-vlan [type]
2CSNXXX_SWUM204.book Page 822 Monday, January 25, 2016 1:25 PM