Administrator Guide

Layer 2 Switching Commands 845
To remove the protocol from the protocol-based VLAN group identified by
groupid , use the no form of this command.
Syntax
vlan protocol group add protocol group-id ethertype value
no vlan protocol group add protocol group-id ethertype value
• group-id — The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group
command. To see the group ID associated with the name
of a protocol group, use the
show port protocol all command.
•
ethertype value — The protocol you want to add. The ethertype value can
be any valid hexadecimal number in the range 0x0600 to 0xffff.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add the "ip" protocol to the protocol
based VLAN group identified as "2."
console(config)#vlan protocol group add protocol 2 ethertype 0xXXXX
vlan protocol group name
This is a new command for assigning a group name to vlan protocol group id .
Syntax
vlan protocol group name group-id groupName
no vlan protocol group name group-id
2CSNXXX_SWUM204.book Page 845 Monday, January 25, 2016 1:25 PM