Administrator Guide

Security Commands 888
show authentication
Use this command to list the authentication methods configured on the
interface and display if the Tiered Authentication feature is enabled.
Syntax
show authentication [interface { interface-id | all}]
• interface-id —The physical interface.
•
all —All interfaces.
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
console# show authentication
Tiered Authentication.......................... Enabled
console# show authentication interface gi1/0/1
Port........................................... Gi1/0/1
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined
undefined
Enabled method priority........................ undefined undefined
undefined
Number of authenticated clients................ 1
Logical Interface.............................. 0
client mac addr:............................... 00:00:00:00:00:01
Authenticated Method:.......................... dot1x
Auth State..................................... success
Auth Status.................................... Authenticated
2CSNXXX_SWUM204.book Page 888 Monday, January 25, 2016 1:25 PM