Administrator Guide

Security Commands 891
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
config# show authentication statistics gi1/0/1
Port........................................... Gi1/0/1
802.1x attempts................................ 1
802.1x failed attempts......................... 0
Mab attempts................................... 0
Mab failed attempts............................ 0
Captive-portal attempts........................ 0
Captive-Portal failed attempts................. 0
show authorization methods
Use the show authorization methods command to display the configured
authorization method lists.
Syntax
show authorization methods
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
Command authorization is supported only for the line, telnet, and SSH
access methods.
2CSNXXX_SWUM204.book Page 891 Monday, January 25, 2016 1:25 PM