Administrator Guide

Security Commands 908
– error (3)
–warning (4)
–notice (5)
–info (6)
–debug (7)
•
none — If you specify this keyword, no log messages are e-mailed urgently. All log
messages at or above the non-urgent level (configured with the logging email
command) are e-mailed in batch.
Default Configuration
The default severity level is alert.
Command Mode
Global Configuration mode
User Guidelines
Log messages at or above this severity level are considered urgent. By default,
Emergency and Alert log messages are considered urgent. Urgent log
messages are e-mailed immediately, one log message per e-mail message, and
do not wait for the log time to expire. Urgent log messages are not e-mailed
unless you enable e-mail alerting with the logging email command.
logging traps
Use the logging traps command in Global Configuration mode to set the
lowest severity level at which SNMP traps are logged. To revert the urgent
severity level to its default value, use the no form of this command.
Syntax
logging traps severity
no logging traps
• severity —If you specify a severity level, log messages at or above the
severity level are e-mailed. The severity level may either be specified by
keyword or as an integer from 0 to 7. The accepted keywords, and the
numeric severity level each represents, are as follows.
2CSNXXX_SWUM204.book Page 908 Monday, January 25, 2016 1:25 PM