Administrator Guide

Security Commands 925
Command Mode
RADIUS Server Configuration
User Guidelines
The switch sends the value supplied by the RADIUS server in the Class
attribute. The Class attribute may be up to 16 octets in length
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#conf
console(config)#radius-server host 4.3.2.1
console(config-auth-radius)#attribute 25 access-request include
attribute 31
Use the attribute 31 command to alter the format of the MAC address sent to
the RADIUS server in the Calling-Station-Id attribute and the USER-NAME
attribute when authenticating using 802.1X MAC based authentication for
an interface. Use the no form of the command to return the MAC address
format to the default.
Syntax
attribute 31 mac format { ietf | unformatted | legacy } [lower-case | upper-
case]
no attribute 31 mac format
• ietf—Format the MAC address as aa-aa-bb-bb-cc-cc. The default is upper
case.
• unformatted—Format the MAC address as aaaabbbbcccc. The default is
lower case.
• legacy—Format the MAC address as aa:aa:bb:bb:cc:cc. The default is lower
case.
• lower-case—Format hexadecimal characters using the character set [0-9a-
f].
2CSNXXX_SWUM204.book Page 925 Monday, January 25, 2016 1:25 PM