Administrator Guide

Security Commands 937
Default Configuration
By default, the switch does not send the Framed-IP-Address attribute to the
authentication server.
Command Mode
Global Configuration
User Guidelines
The switch sends the IP address of the host attempting to access the network
in the Framed-IP-Address attribute.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#conf
console(config)#radius-server attribute 8 include-in-access-req
radius-server attribute 25
Use the radius-server attribute 25 command to globally enable the switch to
send the RADIUS Class attribute as supplied by the RADIUS server in
accounting messages sent to the accounting server.
Syntax
radius-server attribute 25 include-in-access-req
no radius-server attribute 25 include-in-access-req
Default Configuration
By default, the switch sends the Class attribute to the accounting server.
Command Mode
Global Configuration
2CSNXXX_SWUM204.book Page 937 Monday, January 25, 2016 1:25 PM