Administrator Guide

Security Commands 947
User Guidelines
User must enter the mode corresponding to a specific RADIUS server before
executing this command.
Example
The following example of the retransmit command specifies five retries.
console(config)#radius-server host 192.143.120.123
console(config-radius)#retransmit 5
show aaa servers
Use the show aaa servers command to display the list of configured RADIUS
servers and the values configured for the global parameters of the RADIUS
servers.
Syntax
show aaa servers [accounting | authentication] [name [ servername ]]
• accounting —This optional parameter will cause accounting servers to be
displayed.
•
authentication —This optional parameter will cause authentication servers
to be displayed.
•
name —This optional parameter will cause the server names to be
displayed instead of the server configuration parameters.
•
servername —Will cause only the server(s) with server-name name to be
displayed. There are no global parameters displayed when this parameter is
specified.
Default Configuration
All authentication servers are displayed by default.
Command Mode
User Exec, Privileged Exec, Configuration mode and all Configuration
submodes
2CSNXXX_SWUM204.book Page 947 Monday, January 25, 2016 1:25 PM