Administrator Guide

Security Commands 953
RADIUS Accounting Server Name................. Default_RADIUS_Server
Host Address.................................. 192.168.37.200
Round Trip Time............................... 0.00
Requests...................................... 0
Retransmissions............................... 0
Responses..................................... 0
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
console#show radius statistics name Default_RADIUS_Server
RADIUS Server Name............................ Default_RADIUS_Server
Server Host Address........................... 192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
source-ip
Use the source-ip command in RADIUS Server Configuration mode to
specify the source IP address to be used for communication with RADIUS
servers. 0.0.0.0 is interpreted as a request to use the IP address of the outgoing
IP interface.
Syntax
source-ip source
• source — A valid source IP address.
Default Configuration
The IP address is of the outgoing IP interface.
2CSNXXX_SWUM204.book Page 953 Monday, January 25, 2016 1:25 PM