Administrator Guide

Security Commands 996
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 0000.0000.0000
EAP Response/Id Frames Received................ 0
EAP Response Frames Received................... 0
EAP Request/Id Frames Transmitted.............. 0
EAP Request Frames Transmitted................. 0
Invalid EAPOL Frames Received.................. 0
EAPOL Length Error Frames Received............. 0
show dot1x users
Use the show dot1x users command in Privileged Exec mode to display
802.1x authenticated users for the switch.
Syntax
show dot1x users [username username ]
• username — Supplicant username (Range: 1–160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x users.
console#show dot1x users
Port Username
--------- ---------
Gi1/0/1 Bob
Gi1/0/2 John
Switch# show dot1x users username Bob
2CSNXXX_SWUM204.book Page 996 Monday, January 25, 2016 1:25 PM