Users Guide

1148 Data Center Bridging Features
percentage of the total bandwidth and is used to shape egress traffic bursts to
no greater than the configured value. The maximum bandwidth may be
configured on a single interface, range of interfaces or all interfaces. When
configured to be 0, unlimited bandwidth is allowed on the TCG.
It is recommended that the maximum bandwidth be configured to be greater
than the minimum bandwidth or the weight or be configured to 0 (unlimited
burst size).
console(config-if-Te1/0/1)# traffic-class-group max-bandwidth 50 90 20
9. Set the Scheduler Modes for the TCGs
This step enables strict priority scheduling on TCGs. Strict priority
scheduling on multiple TCGs prioritizes traffic from the highest numbered
TCG for transmission first. Strict priority scheduling on a single TCG selects
that TCG for transmission before the WDRR TCGs. Use the 'no' command
to disable strict priority scheduling. It is recommended that all CoS queues
enabled for strict priority scheduling be assigned to a single TCG other than
TCG0. This scheme allows a larger number of priorities to be configured as
strict priorities.
console(config-if-Te1/0/1)#traffic-class-group strict 2
To show the weight, minimum bandwidth, maximum bandwidth, and
scheduler modes of the TCGs, use the following command:
console# show interfaces traffic-class-group tengigabitethernet
1/0/1
Interface...................................... Te1/0/1
Traffic Class Min. Max
Group Bandwidth Bandwidth Weight Scheduler Type
------------ --------- ------------ ------ --------------
0 10 50 30 Weighted Round Robin
1 50 90 70 Weighted Round Robin
2 0 20 0 Strict