Users Guide

290 Authentication, Authorization, and Accounting
Which RADIUS Attributes Does the Switch Support?
Table 10-6 lists the RADIUS attributes that the switch supports and indicates
whether the 802.1X feature, User Manager feature, or Captive Portal feature
supports the attribute. The RADIUS administrator must configure these
attributes on the RADIUS server(s) when utilizing the switch RADIUS
service, and may also need to enable processing of the specific attribute on
the switch.
Table 10-6. Supported RADIUS Attributes
Type RADIUS Attribute Name 802.1X User Manager Captive Portal
1 User-Name Yes Yes No
2 User-Password Yes Yes No
3 CHAP-Password Yes No No
4 NAS-IP-Address Yes Yes No
5 NAS-Port Yes No No
6 Service-Type Yes Yes No
8 Framed-IP-Address Auth. only Yes No
11 Filter-Id Yes No No
12 Framed-MTU Yes No No
15 Login-Service No Yes No
18 Reply-Message Auth. only Yes No
24 State Yes Yes No
25 Class Yes Yes No
26 Vendor-Specific Yes Yes Yes
27 Session-Timeout Yes No Yes
28 Idle-Timeout No No Yes
29 Termination-Action Yes No No
30 Called-Station-Id Yes No No
31 Calling-Station-Id Yes No Yes
32 NAS-Identifier No Yes No
40 Acct-Status-Type Acct. only Yes No