Users Guide

446 Managing General System Settings
The switch can obtain the time from a Simple Network Time Protocol
(SNTP) server, or the time can be set manually. Table 12-2 describes the
settings that help the switch keep track of time.
The Dell EMC Networking N1524P/N1548P, N2024P/N2048P, N2128PX-ON,
N3024P/N3048P/N3048EP-ON, and N3132PX-ON switch ports are IEEE
802.1at-2009-compliant (PoE Plus) and can provided up to 34.2W of power
per port. For more information about PoE Plus support, see "Power over
Ethernet (PoE) Plus Features" on page 81.
CLI Banner Displays a message upon connecting to the switch or logging on
to the switch by using the CLI.
SDM Template Determines the maximum resources a switch or router can use
for various features. For more information, see "What Are SDM
Templates?" on page 447
Table 12-2. Time Settings
Feature Description
SNTP Controls whether the switch obtains its system time
from an SNTP server and whether communication
with the SNTP server requires authentication and
encryption. Information for up to eight SNTP servers
can be configured. The SNTP client on the switch can
accept updates from both IPv4 and IPv6 SNTP servers.
Real time clock (RTC) If SNTP is disabled, the system time and date can be
entered manually.
Time Zone Specifies the offset from Coordinated Universal Time
(UTC), which is also known as Greenwich Mean Time
(GMT).
Summer Time In some regions, the time shifts by one hour in the fall
and spring. In the United States, this is called daylight
saving time.
Table 12-1. System Information (Continued)
Feature Description