Administrator Guide

Dell EMC Networking CLI 160
BFD
arp cachesize Configures the maximum number of entries in
the ARP cache.
GC
arp dynamicrenew Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
GC
arp purge Causes the specified IP address to be removed
from the ARP cache.
PE
arp resptime Configures the ARP request response timeout. GC
arp retries Configures the ARP count of maximum request
for retries.
GC
arp timeout Configures the ARP entry age-out time. GC
clear arp-cache Removes all ARP entries of type dynamic from
the ARP cache.
PE
clear arp-cache management Removes all entries from the ARP cache learned
from the management port.
PE
ip local-proxy-arp Enables proxying of ARP requests. IC
ip proxy-arp Enables proxy ARP on a router interface. IC
show arp Displays the Address Resolution Protocol (ARP)
cache.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
feature bfd Enables BFD on the router. GC
bfd echo Enables BFD echo mode on an interface. IC
bfd interval Configures BFD session parameters for a VLAN
routing interface.
IC
bfd slow-timer Configures the BFD periodic slow transmission
interval for BFD Control packets.
GC
ip ospf bfd Enable sending of BFD events to OSPF on a
VLAN routing interface.
IC
Command Description Mode
a