Administrator Guide

Dell EMC Networking CLI 166
neighbor route-map (IPv6
Address Family
Configuration)
Specifies a route map to be applied to inbound
or outbound IPv6 routes.
IPAF
neighbor route-reflector-
client (BGP Router
Configuration)
Configures an internal peer as an IPv4 route
reflector client.
BR
neighbor route-reflector-
client (IPv6 Address Family
Configuration)
Configures an internal peer as an IPv4 route
reflector client.
IPAF
neighbor send-community
(BGP Router
Configuration)
Configures the local router to send the BGP
communities attribute in UPDATE messages to
a specific neighbor.
BR
neighbor send-community
(IPv6 Address Family
Configuration)
Tells BGP to send the COMMUNITIES
attribute with routes advertised to the peer.
IPAF
neighbor shutdown Administratively disables communications with
a specific BGP neighbor.
BR,
IPAF
neighbor timers Overrides the global keepalive and hold timer
values as well as set the keepalive and hold
timers for a specific neighbor.
BR
neighbor update-source Configures BGP to use a specific IP address as
the source address for the TCP connection with
a neighbor.
BR
network (BGP Router
Configuration)
Configures BGP to advertise an address prefix. BR
network (IPv6 Address
Family Configuration)
Identifies network IPv6 prefixes that BGP
originates in route advertisements to its
neighbors.
IPAF
redistribute (BGP) Configures BGP to advertise routes learned by
means outside of BGP. BGP can redistribute
local (connected), static, OSPF, and RIP routes.
BR
redistribute (BGP IPv6) Configures BGP to redistribute non-BGP routes
from the IPv6 routing table.
IPAF
Command Description Mode
a