Administrator Guide

Dell EMC Networking CLI 206
PHY Diagnostics
Power Over Ethernet (PoE)
nsf Enables display of the message of the day
banner on the console, telnet, or SSH
connection.
LC
password (Line
Configuration)
Specifies a password on a line. LC
show line Displays line parameters. UE
speed Sets the serial port BAUD rate. LC
terminal length Sets the terminal length. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
show copper-ports tdr Displays the last TDR (Time Domain
Reflectometry) tests on specified ports.
PE
show fiber-ports optical-
transceiver
Displays the optical transceiver diagnostics. PE
test copper-port tdr Diagnoses with TDR (Time Domain
Reflectometry) technology the quality and
characteristics of a copper cable attached to a
port.
PE
Command Description Mode
a
power inline Enables/disables the ability of the port to
deliver power.
IC
(Ethernet)
power inline detection Configures the detection type that tells
which types of PD’s will be detected and
powered by the switch.
IC
power inline four-pair
forced
Forces 4-pair power feed on an interface. IC
Command Description Mode
a