Administrator Guide

Switch Management Commands 2125
show snmp
Use the show snmp command to display the SNMP communications status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP communications status.
console(config)#show snmp
Community-String Community-Access View Name IP Address IP
Mask
-------------------- ---------------- ---------------- ----------- --------
private Read/Write Default All All
public Read Only Default 1.1.1.1 255.255.255.254
Community-String Group Name IP Address IP Mask
-------------------- ------------------------------ ---------- -------------
private DefaultWrite All All
public DefaultRead All All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO
Retries