Administrator Guide

Switch Management Commands 2132
• ospf—Display OSPFv2 specific trap settings.
• ospfv3—Display OSPFv3 specific trap settings.
• captive-portal—Display captive-portal specific trap settings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example #1
console#show trapflags
Authentication Flag............................ Enable
Auto-copy-sw Flag.............................. Enable
Dot1q Flag..................................... Enable
Link Up/Down Flag.............................. Enable
Port-security violation Flag................... Enable
Multiple Users Flag............................ Enable
Mbuf Threshold Flag............................ Enable
CPU Threshold Flag............................. Enable
Spanning Tree Flag............................. Enable
PoE Traps...................................... Enable
VRRP trap...................................... Enable
ACL Traps...................................... Enable
BGP Traps...................................... Disable
DVMRP Traps.................................... Disable
OSPFv2 Traps................................... Disable
PIM Traps...................................... Disable
OSPFv3 traps................................... Disable
CP Traps....................................... Disable
Example #2
console#show trapflags ospf
OSPFv2 traps................................... Disabled
errors:
all....................................... Disabled