Administrator Guide

Layer 2 Switching Commands 308
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
Use the show mac address-table multicast to display multicast MAC address
entries along with forbidden multicast MAC entries.
Example
In this example, all classes of entries in the mac address-table are displayed.
console#show mac address-table
Aging time is 300 Sec
Vlan Mac Address Type Port
---- ---------------- ---------- -----------
0 001E.C9AA.AE19 Management CPU Interface
1 001E.C9AA.AC19 Dynamic Gi1/0/21
1 001E.C9AA.AE1B Management Vl1
10 001E.C9AA.AE1B Management Vl10
90 001E.C9AA.AE1B Management Vl90
Total MAC Addresses in use: 5
show mac address-table address
Use the show mac address-table address command in User Exec or Privileged
Exec mode to display all entries in the bridge-forwarding database for the
specified MAC address.
Syntax
show mac address-table address mac-address [interface interface-id] [vlan
vlan-id]
mac-address
A MAC address.
interface-id
Display information for a specific interface. Valid
interfaces include Ethernet ports and port channels.
vlan-id
Display entries for the specific VLAN only. The range is 1 to
4093.