Administrator Guide

Layer 2 Switching Commands 323
Default Configuration
ISDP sends version 2 packets by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#isdp advertise-v2
isdp enable
The isdp enable command enables ISDP on the switch. User the “no” form
of this command to disable ISDP. Use this command in global configuration
mode to enable the ISDP function on the switch. Use this command in
interface mode to enable sending ISDP packets on a specific interface.
Syntax
isdp enable
no isdp enable
Default Configuration
ISDP is enabled.
Command Mode
Global Configuration mode.
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enables isdp on interface Gi1/0/1.