Administrator Guide

Security Commands 949
console(config)#radius server key 0 “This is a key string”
radius server retransmit
Use the radius server retransmit command to specify the number of times the
RADIUS client will retransmit requests to the RADIUS server. To reset the
default configuration, use the no form of this command.
Syntax
radius server retransmit retries
no radius server retransmit
• retries — Specifies the retransmit value. (Range: 1–10)
Default Configuration
The default is 1 retry.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number of times the RADIUS client
attempts to retransmit requests to the RADIUS server to five attempts.
console(config)#radius server retransmit 5
radius server source-ip
Use the radius server source-ip command to specify the source IPv4 address
used in the IP header for communication with RADIUS servers. To return to
the default, use the no form of this command. 0.0.0.0 is interpreted as a
request to use the IPv4 address of the outgoing IP interface.
Syntax
radius server source-ip source