Users Guide

Images and File Management 533

Mode................................... Binary

Data Type.............................. Code

Management access will be blocked for the duration of the

transfer

Are you sure you want to start? (y/n) y

Copy the running-config to the USB flash drive.

console#copy running-config usb://rc_backup.scr

Mode............................. Binary

Data Type........................ Config Script

Source Filename.................. temp-config.scr

Management access will be blocked for the duration of the

transfer

Are you sure you want to start? (y/n) y

Download the new image from the USB flash drive to the switch. The

image overwrites the backup image.

console#copy usb://new_image.stk backup

Mode................................... Binary

Data Type.............................. Code

Destination Filename................... backup

Management access will be blocked for the duration of the

transfer

Are you sure you want to start? (y/n) y

To activate the new image after it has been successfully downloaded to the

switch, follow the procedures described in Upgrading the Firmware,

starting with step 5.