Users Guide

Security Commands 1030
console(mail-server)#port 1024
Command History
Example added in the 6.4 release.
Description updated in the 6.4 release.
username (Mail Server Configuration Mode)
Use the username command in Mail Server Configuration mode to configure
the username required by the authentication. Use the no form of the
command to revert the username to the default value.
Syntax
username username
no username
Default Configuration
The default value for username is admin.
Command Mode
Mail Server Configuration
User Guidelines
This command has no user guidelines.
Example
console(config)#mail-server 10.131.1.11
console(mail-server)#username admin
Command History
Example added in the 6.4 release.