Users Guide

Security Commands 1084
Default Configuration
The default value is 15 seconds.
Command Mode
RADIUS Server Configuration mode
User Guidelines
The administrator must enter the mode corresponding to a specific RADIUS
server before executing this command. This command overrides the global
configuration for the selected server.
Example
The following example specifies the timeout setting for the designated
RADIUS Server.
console(config)#radius server host 192.143.120.123
console(config-radius)#timeout 20
usage authmgr
Use the usage authmgr command in RADIUS mode to specify the usage type
of the server.
Syntax
usage authmgr type
• type — The type can be one of the following values: login , authmgr , or all .
Default Configuration
The default variable setting is all.
Command Mode
RADIUS Server Configuration mode