Users Guide

Security Commands 1090
Examples
The following example displays TACACS+ server settings.
console#show tacacs
Global Timeout: 5
Server Address Port Timeout Priority Source Interface
--------------- ----- ------- -------- -----------------
10.254.24.162 49 Global 0 Loopback 0
tacacs-server host
Use the tacacs-server host command in Global Configuration mode to
configure a TACACS+ server. This command enters into the TACACS+
configuration mode. To delete the specified hostname or IP address, use the
no form of this command.
Syntax
tacacs-server host { ip-address | hostname }
no tacacs-server host {
ip-address | hostname }
•
ip-address — The IP address of the TACACS+ server.
•
hostname — The hostname of the TACACS+ server. (Range: 1-255
characters).
Default Configuration
No TACACS+ host is specified.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple tacacs-server host commands can be used.
TACACS servers are keyed by the host name, therefore it is advisable to use
unique host names.