Users Guide

Dell EMC Networking CLI 113
duplex Configures the duplex operation of a given
Ethernet interface
IC
flowcontrol Configures the flow control on a given interface. GC or
IC
forward-error-correction Configures the forward error correction for
25G/50G/100G Ethernet interfaces
IC
interface Enters the interface configuration mode to
configure parameters for an interface.
GC or
IC
interface range Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
GC or
IC or
IR
link debounce time Configures the debounce timer for one or
multiple interfaces.
IC or
IR
rate-limit cpu Reduces the amount of unknown
unicast/multicast packets forwarded to the
CPU.
GC
show interfaces Lists the traffic statistics for one or multiple
interfaces.
PE
show interfaces advertise Displays information about auto negotiation
advertisement.
PE
show interfaces
configuration
Displays the configuration for all configured
interfaces.
UE
show interfaces counters Displays traffic seen by the Ethernet interface. UE
show interfaces debounce Lists the debounce information for one or
multiple interfaces.
PE or
GC
show interfaces description Displays the description for all configured
interfaces.
UE
show interfaces detail Displays the detail for all configured interfaces. UE
show interfaces status Displays the status for all configured interfaces. UE
show interfaces transceiver Display the optic static parameters as well as
the Dell EMC qualification.
PE
show interfaces trunk Display active trunk interface information. PE or
GC
Command Description Mode
a